Copel Industry Supply
Copel Industry Supply 199603022787 (001047899-T)

No. 19, Jalan Utama 2/34, Taman Perindustrian Puchong Utama, 47100 Puchong, Selangor, Malaysia.

Tel  :  (603) 8061 3289
H/P  :  (6012) 203 0028
Fax  :  (603) 8061 3803
   (6012) 203 0028
copelindustry@gmail.com

ULTRALINE supplies a wide variety of high-performance oils and greases specially formulated to meet the needs of food, beverage and pharmaceutical operations.

These food-grade lubricants conform to requirements under H-1 designations of the U.S. Department of Agriculture (USDA) for incidental food contact. The FDA has determined the safe components of food grade lubricants. NSF International maintains the Class H1 list of food grade lubricants that can be used in equipment found in food and beverage manufacturing plants.

ULTRALINE knows about the severe operating conditions and expensive machinery at these companies. That’s why our H1 products are particularly suitable for plant operations in these industries, due to their resistance to washout and emulsification with water, which causes viscosity degradation that contributes to mechanical wear and premature loss of machine usefulness. Our proprietary high-technology additives used in these H1 products provide improved resistance to oxidation, which extends oil life by preventing pre-mature breakdown.

Lubricant contamination is a continual threat for the food and beverage industry. Although strong maintenance and operational practices may lower the chance that oils and grease can contaminate products, they cannot always prevent leaks and spills. So any plant still using non-food grade lubes is at risk for an expensive product recall that could damage their brand and company reputation.

NSF H1 Lubricants

Cleared for Incidental Food Contact

Lubricants that are NSF H1 certified have been cleared for use in USDA-inspected food processing plants and can be used where incidental food contact may occur. Use for an H1 lubricant include protective antirust film, release agent on gaskets or seals of tank closures, and lubricant for machine parts and equipment. The amount of lubricant used be the smallest needed to accomplish the desired effect.

 

Food Industry Approvals

* NSF H1 registered

* Complies with FDA 21 CFR 178.3570 “Lubricants with incidental food contact”,

CFR 21-Section 176.170 – Components of paper and paperboard;

CFR 21, Section 172.878 – White Mineral Oil and CFR 21,

Section 178.3620 (a) – White Mineral Oil in contact with aqueous and fatty foods.

 

Food Machinery Grade Grease

ULTRALINE SYNTHETIC FOOD GRADE HIGH TEMPERATURE GREASES FGP-227

 

Synthetic Food Grade High Temp Grease NIGL No.2: FGP-227

 

ULTRALINE FGP-227 Synthetic Grease is specially formulated to provide outstanding lubrication in food processing applications running under heavier loads or subject to high and low temperature extremes. It provides exceptional performance over a wide operating temperature range of -40°C to 160°C (up to 200’C in intermittent-use situations), making it suitable for both hot and cold applications. It is recommended as a multipurpose lubricant across all food processing applications including mixing, cooking, stirring, baking, frying, packaging, canning and bottling.

 

Food Industry Approvals

* NSF H1 registered

* Complies with FDA 21 CFR 178.3570 “Lubricants with incidental food contact”

* Halal certified

 

ULTRALINE SEMI-SYNTHETIC FOOD GRADE GREASE FLG-226

 

Food Grade Aluminium Complex Grease NLGI 2: FLG-226

 

ULTRALINE FLG-226 Semi-Synthetic grease, are premium white Aluminium Complex greases specially developed for the lubrication of all types of machinery used in the food processing industry Food Machinery Grade Greases. These greases provide good load-carrying capacity, resistance to water washout, and are typically used in bearing and gear applications, with operating temperature capabilities from -20°C to 150°C. They can be used in a wide range of food processing applications including sleeve and anti-friction bearings, slides, guides and couplings found on food processing machinery.

 

Food Industry Approvals

* NSF H1 registered

* Complies with FDA 21CFR 178.3570 “Lubricants with incidental food contact”

* Free of genetically modified substances (GMS)

* Halal certified

* Maintains food allergy safety:- free of gluten – contains no peanuts, tree nuts or derivatives



Brands:

ULTRALINE SYNTECH WESTERN OIL GTO TECTYL

Related Categories:

  1. Lubricants

Enquiry Form

Captcha