Grundfos Unilift AP35B.50.06.A1V 230V waste water pump
Stainless steel vortex waste water pump, max flow rate 5l/sec and max head 10m, 2" threaded connections and 35mm solids handling
Unilift AP35B.50.08.1.V
Submersible effluent pump
Vertical single-stage stainless steel submersible pump with integrated submersible 1-phase motor.
The pump is fitted with ring stand and carrying handle and is supplied with a 10 m mains cable.
The impeller is a VORTEX impeller for 35 mm free passage suitable for pumping surface water, groundwater, wastewater and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings.
The pump has R 2" discharge port and is ready for installation either free-standing or on an auto-coupling system.
Specifications
- Liquid:
- Maximum liquid temperature: 40 °C
- Density: 998.2 kg/m³
Technical:
- Type of impeller: VORTEX
- Maximum particle size: 35 mm
Materials :
- Pump housing: Stainless steel DIN W.-Nr. 1.4301 AISI 304
- Impeller: Stainless steel DIN W.-Nr. 1.4301 AISI 304
Electrical data:
- Type of motor: PSC
- Power input - P1: 1.25 kW
- Mains frequency: 50 Hz
- Rated voltage: 1 x 230 V
- Rated current: 5.44 A
- Cos phi - power factor: 0,98
- Rated speed: 2795 rpm
- Capacitor size - run: 16 µF/400 V
- Enclosure class (IEC 34-5): IP68
- Insulation class (IEC 85): F
- Length of cable: 10 m
- Type of cable plug: SCHUKO
Others:
- Net weight: 11.4 kg
- Gross weight: 12 kg
- Danish VVS No.: 391270132
- Swedish RSK No.: 5885935
